What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Sump Gasket P/N Question

bill.hutchison

Well Known Member
Have decided to attack the sump leaks, and am looking to order a new gasket.

I have an ECI Titan O-360-A4B1N motor. No, it's not a very common model, but Conti assures me that everything from an -A1A motor applies.

Anyway - the hardware guide they provided me doesn't list the gasket between the sump/cases/accessory case - only the crush gasket for the oil suction screen. Here's where I've been looking beyond that:

The Lycoming parts catalog doesn't list it specifically here, (I looked in section 6-1) https://www.lycoming.com/sites/default/files/O-360-A Parts Catalog PC-306-1.pdf so I started googling.

I've found various part number returns (LW-13353, for example) when searching for "O-360 A1A sump gasket" but I'm not sure if I'm getting the right ones. I did email James Ball at Conti but haven't heard back yet with the holidays.

Is there another authoritative source for this?

Wondering if you guys knew what the right P/N was so I could order?

Thanks in advance.
 
Back
Top