Hello all. I am currently in the process of building the Vans toolbox kit and I am not as ready or skilled as I thought I might be, LOL. I am desperately looking for help and/or direction. Lol. I just finished trying to rivet my two sides together to the tool box and almost every rivet head did not sit flush. i can catch my finger nail underneath almost every rivet head. I checked my dimplier and the diameter of the male end is the same as the rivet maybe .001 bigger. I think my problem might be that the dimplier I have is a hammer strike blow type of dimplier. Could this be the problem? I also used a standard 3x rivet gun. Should I drill out every rivet and try again?
Last edited: