VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 08-05-2022, 09:05 AM
N605RV N605RV is offline
 
Join Date: Sep 2019
Location: Golden
Posts: 39
Default which oil temp sensor for Lycoming 0-360L

anyone have a P/N for an oil temp sensor for a Lycoming 0-360-J2A. I replaced mine during a repair with one I ordered and now it reads between -9 and 199 (C) so obviously something is wrong, wondering if it's the sensor.
thanks
Mike in Boulder
N605RV
Reply With Quote
  #2  
Old 08-05-2022, 12:22 PM
RV6_flyer's Avatar
RV6_flyer RV6_flyer is offline
 
Join Date: Jan 2005
Location: NC25
Posts: 3,981
Default

It depends on the engine monitor.

When I had a Rocky Mountain Instrument microMonitor engine monitor, it used a homemade oil temp sensor. When I changed to a Dynon EMS-D10, the sensor kit came with a different oil temp sensor and the Dynon engine monitor needed programmed for the sensor that I used and could have been programmed to use several different sensors.
__________________
Gary A. Sobek
NC25 RV-6
Flying
3,500+ hours
Where is N157GS
Building RV-8 S/N: 80012

To most people, the sky is the limit.
To those who love aviation, the sky is home.
Reply With Quote
  #3  
Old 08-10-2022, 06:37 AM
GalinHdz's Avatar
GalinHdz GalinHdz is offline
 
Join Date: Mar 2010
Location: KSGJ / TJBQ
Posts: 2,368
Default

We would need more information in order to help out.

1 - What oil temp sensor did you have?
2 - How is it grounded?
3 - What are you using to display the temp? Steam, Electronic or EFIS?
__________________
Galin
CP-ASEL-AMEL-IR
FCC Radiotelephone (PG) with Radar Endorsement
2022 Donation made
www.PuertoRicoFlyer.com
Reply With Quote
  #4  
Old 08-20-2022, 06:03 PM
N605RV N605RV is offline
 
Join Date: Sep 2019
Location: Golden
Posts: 39
Default

Hi, it's an antiquated Rocky Mountain Instrument EMS so you're right, I need the homemade version and posted a note to that effect. Learning something new every day - just trying to limp along until I get an all-new panel
thanks for the note. much appreciated.
Mike
Reply With Quote
  #5  
Old 08-20-2022, 06:10 PM
N605RV N605RV is offline
 
Join Date: Sep 2019
Location: Golden
Posts: 39
Default oil temp sensor woes

Hi everyone. It is an ancient Rocky Mountain Instruments monitor so yes, recently found out it needs the homemade one (I posted a request in the off-chance someone had one I could buy). Trying to limp along while building a new panel. All the other functions work on the RMI so, to get by, I just ordered a stand-alone Mitchell oil temp guage and sensor to hold me over. I'm an old varize builder and was amazed I would have to build a sensor....
thanks everyone for the replies.
Mike
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:58 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.