What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

1/8 Tube to 1/8 Pipe Transition

RV7ator

Well Known Member
Anyone have a line on sourcing a barbed 1/8 (ID) tube to 1/8 male pipe thread fitting? Also, 1/8 tube barbed tee fittings.

It's for transitioning from the 1/8 tube nipple on P-Mags to 1/8 plumbing, with some tube wyes.

No joy on ACS or Wicks.

John Siebold
 
Go goggling

Here’s some . You can probably also easily find 1/4” barb x 1/8” pipe at any auto parts store and use silicone or urethane to seal the tube into the 1/4” barb
 

Attachments

  • 6759B60B-DE7A-4587-8773-D63B64419285.png
    6759B60B-DE7A-4587-8773-D63B64419285.png
    672 KB · Views: 141
  • 0372D45B-BB44-4E58-872F-0F2C79801CA2.png
    0372D45B-BB44-4E58-872F-0F2C79801CA2.png
    1 MB · Views: 126
1/8" barb x 1/8" Npt barb fitting

Johnstone Supply, local HVACR supply house.

L38-247 part number.

Keith Rhea
RV7
 
Back
Top