What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Page 46-03 Trigger coil gaps wrong from factory

AeroDog

Well Known Member
Friend
Considering that all Rotax engines are run for approximately an hour at the factory before being shipped, why is it that the trigger coil gaps need to be set? All five of my gaps (including the rev counter coil) are considerably less than 0.012 inches.

Jerre
 
Exactly! I left mine the way that they were. The less the gap, the better it
works, as long as parts don't hit each other. My engine has over 300 hours.
 
Oddly, support at Van's didn't know either. There has to be a reason it's in the KAI.
 
Back
Top