What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Carry through bolt drill bushings

Larry DeCamp

Well Known Member
If you need to drill the .312 bolt holes in your rear spar/carry through, I machined 4 drill bushings to assure the hole stays located and squire from 1/16” drill through .312 reamer. The bushings fit in an aluminum plate clamped to the carry through spar. The bushings just pop into the plate as drill size progresses.

You pay Shipping and pass it up when you are done ��
[email protected]
 
Last edited:
Drill jig

Terry, let me know how they work, and pass them on to me. I need to finish drill in the next few weeks.
 
I'm finished with these and will happily shoot them to somebody else who wants to pay the shipping on them and a donation to doug.

Marlonyoung, thats you if you want them, but since it's now a ridiculous 9 months later, I'm assuming that you probably found a more timely solution.

anybody else?

ps- Larry DeCamp, thanks for offering these up, they worked great.
 
Back
Top