What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Pitch/Roll leveling calibration

ljpgrif

Member
Need to perform a Pitch/Roll leveling calibration on my RV-7A and need alittle info if possible.

Note: This and one more will be my second time I've done this since I was not the builder/Installer. But been flying this plane for 3 years.

Do you level the plane then calibrate or do you raise the nose up 3 or 4 degrees then calibrate to level?

After the pitch/roll calibration is complete.....is it necessary to perform a Magnetometer calibration too?

Thanks
Larry Griffin
Arkansas
N687VR
 
What exactly are you talking about? Calibrating what, exactly? An AI or an ADAHRS? Something else?
 
Back
Top