I just had my Hartzell CS prop serviced for my 9A. The prop shop told me it's common to have problems aligning the front spinner bulkhead to match the spinner holes. This is due to the prop cylinder being re-torqued as part of the servicing which changes the alignment of the 4 bolts attaching the bulkhead to the cylinder.
He mentioned Van's has addressed this issue, but I can't find any information. Any help/advice would be much appreciated.
Mike M.
He mentioned Van's has addressed this issue, but I can't find any information. Any help/advice would be much appreciated.
Mike M.
Last edited: