What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

G3X Touch Wiring

carlrai

Well Known Member
A bit confused:

G3X Diagram on page 27-37 connections for Connext format to GNX 375 using serial in/out 2, pins 14,30,34 on P4X02.

Moving to page 27-25 shows a Vertical Power VPX also connected to serial in/out 2 on the G3X using pins 14, 44 and 30. (same in/out lines, different signal ground.

Do I simply choose another serial in/out pair and configure accordingly or have I discovered a conflict in the drawing guidelines?

I'm probably missing something in the manual (as usual) but if anyone can shed some light on this, I'd be grateful.

Thanks
 
You can use any available RS-232 port of your choice for your Vertical Power unit.
 
Back
Top