What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

MGL Xtreme EMS users

dafast1

Member
been chasing high CHTs since last Fall coincidently after installing this EMS. Dam, might be calibration of the EMS after all. How do you make the EMS reading match what the probes are detecting? Not seeing it in the manual.
https://youtu.be/ryAbsNIM79s
 
what were the temps showing at the point that the water started to boil. to really find out what is going on you really need a calibrated thermometer. without it you really don't know if the mgl is really 20 high or its 10 high and the other gauge is 10 low.

bob burns
RV-4 N82RB
 
Extreme

You have to select the probe type you are using. Goggle extreme install Manuel and all the info is there.
 
Back
Top