What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

FUEL PRESSURE TRANSDUCER INSTALL HELP

chrispratt

Well Known Member
Does anyone have a suggestion for best way to tighten down the nut that connects to the IE 411AB transducer? I can’t find a place to anchor a wrench that will offset the tightening pressure on the nut as I attach the wire connector. These units are prone to failure (the one shown will be my third in 900 hours) and I don’t want to put any pressure on the internal components. My guess is to just snug it down gently.

Thanks for any suggestions.

Chris

 
Back
Top