VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-17-2022, 05:04 PM
cajunwings cajunwings is offline
 
Join Date: Jun 2007
Location: new iberia la
Posts: 905
Default RV9/9A control stick travel

Hey 9/9A flyers. Working on trimming my control sticks to accommodate Tosten grips. My wings are not on so no stops to limit travel. I need to know how far does the stick travel left and right from center and what is your total stick height above the floor. Thanks.

Don Broussard
RV9 Rebuild in Progress
57 Pacer
Reply With Quote
  #2  
Old 01-17-2022, 06:33 PM
PilotjohnS PilotjohnS is offline
 
Join Date: Jan 2016
Location: Southwest
Posts: 2,171
Default Just me

I am not flying yet but have set mine to miss the dash by about 3/4 so i wont pinch my finger. As far as left and right, it bits the throttle plate, but it seems all 9s have this interference in the corner. In actual flying, unlike a cessna, the pitch uses very little of the total travel forward.
__________________
John S

WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.

Dues paid 2022, worth every penny

RV9A- Status:
98% done, 2% left to go
Structure done (less gear)
Electrical/Panel done
Firewall Forward 95% done
Fiberglass 70%
www.pilotjohnsrv9.blogspot.com
Reply With Quote
  #3  
Old 01-17-2022, 10:00 PM
bruceh's Avatar
bruceh bruceh is offline
 
Join Date: Mar 2008
Location: Ramona, CA
Posts: 2,571
Default

Just cut back the stick the distance of the grip you are adding to the end. I think on my Tosten grips, I needed to trim off just a 1/4 to 1/2 inch more.
You can always wait to trim this until you have the wings on and rigged.
__________________
Bruce Hill
RV-9A N5771H flown over 900 hours!
http://www.overthehills.com/RV-9A-Project
APRS Tracking for KJ6YRP and Flying Over the Hills Blog
2021 VAF donator
EAA Tech Counselor, Pre Buys, Build assistance - canopy/tanks/fiberglass/electrical/repairs
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:56 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.