What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Torque on bolts for WD-00110 IO390 cable bracket

coffeeguy

Well Known Member
I'm wondering if anyone has determined the correct torque value for the WD-00110 IO-390C CABLE BRACKET. They are the lower right bolts on the induction system. The manual says to torque to Lycoming documentation. I've gone thru the SSP-1776-5 manual a few times and I'll admit I'm stumped. It appears they are guttentight. Any thoughts would be appreciated.

Jeff
 
Standard torque values

Someone pointed me to this a while back. Most of the Lycoming engine manuals have a section of tables that include standard torque values. If you can’t find a specific reference for a fastener you can reference the table for the torque values. Hope this helps
 

Attachments

  • 4AB9E6F2-A990-42B0-BD02-4A2560988A22.jpg
    4AB9E6F2-A990-42B0-BD02-4A2560988A22.jpg
    171.1 KB · Views: 103
Back
Top