What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Firewall penetration locations

sundog04

Member
I am building a 7A, fixed prop, carburetor. I would like to use metal eyeball carry through devices rather than rubber grommets for the engine control cables. How critical are the specified penetration locations. In the plans the carb mixture cable passes right next to the fuel pump doubler plate. If I moved the location 1/2 inch to center to make room for the eyeball, would it create a problem? How have others worked around this?

Thanks

Mike Morris
[email protected]
 
Back
Top