VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.






VAF on Twitter:
@VansAirForceNet


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-20-2021, 08:49 PM
Jim62 Jim62 is offline
 
Join Date: May 2019
Location: Brenham, TX
Posts: 5
Default Flyleds Position/Strobe Wiring Help

I'm trying to wire the control board into the stock Van's/Stein harness using Flyleds position/strobe lights with a Van's tail strobe.

If you have done this please let me know how you did it. I've read all of Flyleds manuals, emailed Paul, talked with Stein Air, had my tech counselor look at it and it's not getting through my thick head. The simple answer is that I need the board to control the wing strobes but not the tail...simple.

When the rubber meets the road and I start looking for wires to splice and where to put the board, it gets very convoluted. I don't want to get into too many of the specifics but if you've done this, please give me the details on the method you used.

Thanks,

Jim
Reply With Quote
  #2  
Old 04-21-2021, 09:15 AM
Raymo's Avatar
Raymo Raymo is offline
 
Join Date: Nov 2014
Location: Richmond Hill, GA (KLHW)
Posts: 2,339
Default

By "Vans strobe", to you mean the AeroLED Nav/Strobe SunTail? If so, you'll just power it directly from the individual nav and strobe switches. The wingtip FlyLED nav lights can also be powered directly from the nav switch but the strobes, landing and taxi lights need to go through the control board. If you want the option to power the wing nav lights for extra taxi lighting, they will need to go through the control board.

Feel free to PM if you have any questions.
__________________
Ray
RV-7A - Slider - N495KL - First flt 27 Jan 17
O-360-A4M w/ AFP FM-150 FI, Dual PMags, Vetterman Trombone Exh, SkyTech starter, BandC Alt (PP failed after 226 hrs)
Catto 3 blade NLE, FlightLines Interior, James cowl, plenum & intake, Anti-Splat -14 seat mod and nose gear support
All lines by TSFlightLines (aka Hoser)
Reply With Quote
  #3  
Old 04-21-2021, 08:10 PM
Paul from Flyleds's Avatar
Paul from Flyleds Paul from Flyleds is offline
 
Join Date: Apr 2016
Location: Melbourne, Australia
Posts: 268
Default

Hi Jim
I hope my email replies made things clearer for you. Please reach out if they don't!

To close the loop for future searchers, yes you can continue to use the Van's/Aeroleds tail light along with a Flyleds wing kit, all while still using Van's harnesses. As mentioned above, it continues to be powered directly from the panel switches rather than via the Flyleds controller board

I have written a guide specifically covering integrating our kits with the RV-14 harnesses.

__________________
Paul McVitty
Flyleds.com
VAF advertiser
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:18 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.