What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV-14 Rear Glass #27 Final Drill Which Holes?

Meat

Active Member
Patron
Hi All,

On page 38-03, Step 8 it says to remove the rear window and final drill #27 all the holes in the window. Can anyone confirm they are only referring to the rear window holes along the skins that will be dimpled and screws/nuts utilized and not along the roll bar that was drilled #36 and tapped 6-32? The word "all" in Step 8 is confusing. I'm reasonably sure the glass holes along the roll bar are left threaded at 6-32 but trying to confirm that.

Thanks for your time and experience.

Scott Davis
 
All holes are drilled, per the instructions. This will remove the threaded part of the holes, as intended. I surmise this is to give the holes a little wiggle room for expansion/contraction in different temps.

_Alex
 
Back
Top