What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

H2AD mag conversion?

WingnutWick

Well Known Member
Hello all!

The lady’s 6A sporting an H2AD with the infamous dual-mag (aka death mag) is up for annual and the mag is needing inspection/overhaul. Only one side of the mag is used for ignition while the other side of the motor is powered by a light speed. I’d very much love to ditch the Frankenmag altogether and replace it with a PMag. Is anyone aware of any adaption/mod for these motors to use a normal mag/Pmag?

Thanks!
 
Now I do..haha. I had seen some talk about someone creating a adaption and I was wondering if anything had come out over the last couple of years. Thanks again for the info. I may go the 1200 route.

Of note, EMAG says they are working on a solution for this which may be out soon.

Cheers!

Hi Wingnut.
Remember this thread?
https://vansairforce.net/community/showthread.php?t=167259

There was also another thread on this subject recently. https://vansairforce.net/community/showthread.php?t=200793

Good Luck :)
 
Back
Top