What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Crowfoot Wrench Storage

rv12is

Active Member
I've been storing my crowfoot wrench set on the storage rail that it came with. This works, but I wanted a more compact solution. Here is what I came up with.

PXL_20230106_213737079.MP (1).jpgPXL_20230106_213539134.MP.jpg

It takes up quite a bit less room in my tool drawer, the sizes are clearly marked, and they can't be put back in place out of order.

Here's a link to the design:https://www.printables.com/model/361360-crowfoot-10-pc-wrench-holder. It's customized for my specific set (Craftsman CMMT12052LZ 10 pc. SAE Crowfoot wrench set) so I don't know how useful this specific design will be for others. But the concept could be easily adapted for other sets.
 
I like it...thanks for posting the link. Any chance you could post the Solidworks file? Would like to edit for my metric set as well.

Nice!
 
Thanks. I hadn't printed anything in a while and this worked great.
 

Attachments

  • 23FBB7A9-26F8-4D0A-A0CC-2576670480D9.jpeg
    23FBB7A9-26F8-4D0A-A0CC-2576670480D9.jpeg
    488.4 KB · Views: 173
Not meaning to hijack the thread, but Snap-On makes great crowfoot holders. Part number A277 at $7.95 each. Just throw them in a drawer, can pull apart to remove one tool while still keeping all the unused ones on each half.

GM
 

Attachments

  • E9670CE2-E418-4972-9004-C66B6CC6A67B.jpg
    E9670CE2-E418-4972-9004-C66B6CC6A67B.jpg
    360.7 KB · Views: 254
I like it...thanks for posting the link. Any chance you could post the Solidworks file? Would like to edit for my metric set as well.

Nice!

Unfortunately, no. The design was done in Fusion 360, and I don't know a good way to convert between the two.
 
Unfortunately, no. The design was done in Fusion 360, and I don't know a good way to convert between the two.

The only way i've found is to export STEP or IGES (forget which one but I seem to recall F360 can do one of those) and then import to SW.
 
Back
Top