I'm ready to fly my RV-6A without fairings, but fiberglass is not my thing. I'd like to have someone finish the fairings of the gear legs into the fuselage and finish the main wheel pants. At KRIR near Riverside California. 951-906-3190, leave a message if I don't answer.
Send me your email. I will send you an invitation to our SoCal RV group. That should get you connected to someone close to you.
__________________
Axel RV-4 fastback thread and Pics Instagram @ LetMeFlyIt
VAF 2022 paid VAF 704
The information that I post is just that; information and my own personal experiences. You need to weigh out the pros and cons and make up your own mind/decisions. The pictures posted may not show the final stage or configuration. Build at your own risk. Further more, these are my opinions and not those of Van's Aircraft.
I'm ready to fly my RV-6A without fairings, but fiberglass is not my thing. I'd like to have someone finish the fairings of the gear legs into the fuselage and finish the main wheel pants. At KRIR near Riverside California. 951-906-3190, leave a message if I don't answer.
The intersection fairings from RVBits can be pretty much bolt-on. That makes the overall tasks pretty easy.
__________________
Colin P.
RV-6A #20603
Complete 5/10/19
PP SEL / A&P
I donate every year on my B-Day (in Dec)
Fiberglass help in Southern California
Linear Mode
