What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Horizontal Stabilizer Questions

Came to the same conclusion.......Thanks, that makes sense.

Was a little uncertain based on the instructions not having the -6 in step 5.
 
Picture to help.

rkiefer2 said:
Let the games begin. Hit a little speed bump right off the bat.

-Does anyone know what holes step 5 is referring too on page 08-02?
-This spar requires priming as its not alclad, correct?


https://www.dropbox.com/s/8sp1g573e1bcjhq/IMG_3185 2.JPG?dl=0
Click to expand...

I'm by no means an expert at this airplane building stuff:), but if you go the horizontal stab section of my blog and scroll down thru the pictures (just after C-Frame pics), you'll see a a picture showing the rivets you had a question about.
I have to read every step about 5 times..and sometimes still mess it it up:)
Have fun.
 
Last edited:
Talking about the 4 holes in each HS-912 hinge bracket.

The powder coated parts need to have the holes drilled to fit the rivets.
 
You must log in or register to reply here.
Back
Top