VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #11  
Old 05-21-2022, 06:36 PM
ColoradoSolar ColoradoSolar is offline
 
Join Date: Dec 2018
Location: Westcliffe, Colorado
Posts: 185
Default

Quote:
Originally Posted by Untainted123 View Post
Thanks for the info, this helps a lot. I think I get what they are doing now: Power from the GAD13 to the probe (pin 8), a separate wire connected at the probe end together with the wire from pin 8 (pin 3), and the return wire from the other side of the RTD (pin 6).

One last question: is there any polarity on the RTD itself? Or will it work no matter which side I choose for the pin 8 connection?

I finished up my other little project (or least got the plane back together, still need to fly once the WX clears), and will hopefully get to this one soon.
Makes no difference, an RTD is basically a resistor so you can connect to it either way. Just keep the power wire with the + sense wire and you will be fine.
__________________
Eric Vickery

RV-6A Tip-Up Bought Flying
RV-10 #42451 Empennage complete (except fiberglass)
Received Fuselage and wing kits
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:19 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.