Remember the standard RV8 Vans fuel gauge placement, at an angle outside your left knee, set at an angle? I bet I am not the only one that removed them when going EFIS. I closed up the holes with simple matching painted plates using the same screws.
I wondered if anyone has used the fuel gauge locations for storage cup(s) that fits nicely in the 2 1/4" holes and can (or be drilled to) use the same screws. Since the holes are set at an angle, the contents (e.g., pens, AA batteries, headset control) should stay in place even better than a horizontal oriented storage compartment.
I didn't see anything appropriate in a general amazon search. Maybe someone is 3D printing them, or hopefully something else is already available.
I wondered if anyone has used the fuel gauge locations for storage cup(s) that fits nicely in the 2 1/4" holes and can (or be drilled to) use the same screws. Since the holes are set at an angle, the contents (e.g., pens, AA batteries, headset control) should stay in place even better than a horizontal oriented storage compartment.
I didn't see anything appropriate in a general amazon search. Maybe someone is 3D printing them, or hopefully something else is already available.