What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

KX155 w GS work with Dynon D10A?

KX155, Dynon

Thanks, sorta figured but sure was hoping it would work. Now I need to install a VOR head.
 
Removing KLX135, installing KX155?

Struggling with pin out nomenclature difference for the comm side. No audio panel but do have a intercom. Anyone familiar with the two? KLX135 pins 2, 3, 4, 5, 13, 14 vs what on the KX155??? Thanks
 
Struggling with pin out nomenclature difference for the comm side. No audio panel but do have a intercom. Anyone familiar with the two? KLX135 pins 2, 3, 4, 5, 13, 14 vs what on the KX155??? Thanks

Hi Dan,

The KLX135 pins 3 and 4 are mic hi and mic lo and correspond to pins 2 and avionics ground on the KX-155 P401 connector. KLX135 pins 13 and 14 are audio out hi and lo and correspond to pins 9 and K on the KX-155 P401 connector.

KLX135 pin 2 is the interlock pin; not sure what that corresponds to on the KX-155 if the 155 even has an equivalent (I don't think it does).

KLX135 pin 5 is sidetone audio; this is included in the comm audio out from the KX-155 and piped through pins 2 and 6 on the KX-155 P401 connection.

I hope that helps.

Thanks!
Brad
 
Last edited:
Back
Top