VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.






VAF on Twitter:
@VansAirForceNet


Go Back   VAF Forums > Model Specific > RV-7/7A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 11-28-2022, 11:27 AM
fl-mike's Avatar
fl-mike fl-mike is offline
 
Join Date: Jul 2005
Posts: 1,845
Default

Take a look at Figure 4-6 (page 4-21 in my version) in AC 43.13
The second row down shows how a correct set should sit on the rivet.

The size of the set should be stamped on the rim of the set.
But, I agree with the others. Looks like an AD3 set on an AD4 rivet.
__________________
Mike W
Venice, FL

N164WM RV-6A Slider/O-360/FP Sold 4/2022
N184WM (RV-8) Flying. Titan IOX-370/ CS/G3X
N184P reserved (RV-8QB) Empennage kit and QB wings in the shop
Reply With Quote
  #12  
Old 12-05-2022, 08:31 PM
jls32 jls32 is offline
 
Join Date: Jun 2020
Location: Denver, CO
Posts: 25
Default

Thanks for all the replies.

I ordered "another" 1/8" set from Cleaveland and squeezed a bunch of rivets - no more rings. So either what they sent me was a mislabeled 3/32" or there's a defect.

Just eye-balling the two sets, they are almost identical looking.
__________________
RV-7 In progress
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:48 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.