430W error message on startup

R

recapen

Well Known Member

• Sep 29, 2018

• #1

Every time I start my Garmin 430W, I get an error message that reads ?FPL waypoint is locked? ? after reading the message, it goes away. This recently started showing up so I think I may have changed a configuration or entered something that causes this.

Any ideas?

Thanks in advance,

 

steve murray

Well Known Member

• Sep 29, 2018

• #2

Found this on one of the boards. https://support.jeppesen.com/article?pc=&pid=JDM_Windows&aid=kA2600000004FkvCAE. Talks about one of the waypoints no longer being valid.

 

R

recapen

Well Known Member

• Sep 29, 2018

• #3

Thanks - I'll go through my FPL's and look for a lokd!

 

Tankerpilot75

Well Known Member

• Sep 29, 2018

• #4

You also want to checkout ?user defined? way points.

 

B

BobTurner

Well Known Member

• Sep 29, 2018

• #5

Yep. I get this too. It?s because some of my saved flight plans use ECA VOR - which was recently de-commissioned. I haven?t bothered yet to delete/re-do them.

 

R

recapen

Well Known Member

• Oct 1, 2018

• #6

That was the answer ? I found a waypoint in two of my FPLs that were no longer in the Jeppesen database.
They were not user waypoints.

Thanks!