Draker
Well Known Member
Did some reading on VAF and decided to go with braided material for engine to firewall grounding. Is there any guide to the right size of this braid? I have a standard SkyTec starter that came with the Lycoming engine, and am using 4AWG wires for the battery and starter positive current, and I have extra 4AWG crimp lugs I plan to use with the braid. I see Spruce sells a number of sizes, but not sure which one is right for this application. Also B&C offers this material, at significant extra cost. Any suggestions? I plan to double-up the braid as some builders have recommended.