View Single Post
  #4  
Old 11-25-2021, 02:28 PM
PilotjohnS PilotjohnS is offline
 
Join Date: Jan 2016
Location: Southwest
Posts: 2,172
Default Note

Please note, as I mentioned in another post, the GRD on the switch does not have a connection to the aircraft structure ground. You do not want the aircraft structure ground connected to this circuit. At the magneto, the ground for this wire will be hooked to the engine case ground automatically. This way, the mag shield does not carry any current between the aircraft structure and engine case, only mag current. Just follow the diagram and you will be fine.
__________________
John S

WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.

Dues paid 2022, worth every penny

RV9A- Status:
98% done, 2% left to go
Structure done (less gear)
Electrical/Panel done
Firewall Forward 95% done
Fiberglass 70%
www.pilotjohnsrv9.blogspot.com
Reply With Quote