What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

spacer details for elevator pushrod

slngsht

Well Known Member
Hi,
I'm looking at drawings 28 and 30, and see no details for fasteners that hold the big elevator pushrod.

drawing 30 shows AN3-10A bolt and a nut. but no mention of washers or spacers at all.

Does anyone have details on that?
 
My drawing 30 says to see Note 1 for that connection. Note 1 says to use washers as required or make spacers out of AT6-058X5/16 to center the rod end.
 
Back
Top