What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Help - Skyview not showing localizer from SL30

gggflyer

Active Member
Anyone have a skyview and sl30 combo installed. Im having an issue not picking up the localizer on the hsi. I pick up the glideslope and I can also pick up a vor pointer but not a vor cdi or localizer cdi. My sl30 is connected to skyview via serial connection and that connection has no issues. My sl30 shows the localizer on its digital cdi with no issues so its not an issue of the antenna not picking it up.

See Pic.

Anyone have any ideas. Waiting for a call back from dynon
 

Attachments

  • FB_IMG_1642383582631.jpg
    FB_IMG_1642383582631.jpg
    435.6 KB · Views: 192
I have Skyview classic with SL30 and no problems with localizer display when the SL30 is tuned to a localizer frequency and was selected on the display as the HSI source.
 
All fixed

Spoke to Dynon.

When installing SL30, you connect the SL30 to skyview via serial wiring. The caveat is that in the settings for the SL30, even though there is an option for serial connection in the settings, you need to pick "none"

It is counter intuitive but it now works.
 
Back
Top