View Single Post
  #2  
Old 08-08-2022, 11:48 AM
jrs14855 jrs14855 is offline
 
Join Date: Apr 2008
Location: Lake Havasu City AZ
Posts: 2,900
Default GA Prop

Build a tool from wood with rubber padding that will give you some leverage. Use a laser light taped to the protractor in conjunction with marks on floor to adjust the pitch. I did mine with the hub bolts fairly snug but still allowing some movement. The blade tool allows fine adjustments.
Airplane leveled and securely chocked. Leveling can be done at the front face of the hub. The laser beam should be approximately 45 degrees to the floor.
Reply With Quote