Hey guys, just did a 100 hour pmag inspection and borescoped the cylinders. The valves look superb! Can you guys tell me if the cylinder/pistons looks normal? Seems like there is a fair amount of what I'm assuming to be lead deposit on the pistons. Kind of surprised by this as I run LOP or peak anytime I cruise. Oil analysis has been dang good with virtually everything below universal averages. Oil consumption is 1-2 qt per 25 hours. Thanks in advance!
First pics are cylinder 1
First pics are cylinder 1
Attachments
-
S20210804_0001.jpg99.2 KB · Views: 323
-
S20210804_0002.jpg102 KB · Views: 285
-
S20210804_0004.jpg118.4 KB · Views: 295
-
S20210804_0005.jpg91.9 KB · Views: 288
-
S20210804_0007.jpg147.4 KB · Views: 308
-
S20210804_0008.jpg127 KB · Views: 319
-
S20210804_0009.jpg182.9 KB · Views: 264
-
S20210804_0012.jpg134.6 KB · Views: 310
-
S20210804_0017.jpg168.4 KB · Views: 286
-
S20210804_0019.jpg160.5 KB · Views: 291