Originally Posted by dougmattson
Has anybody tried putting a rivet like a static port in the wing at a 45 degree angle for the AOA?
Yes, but not as simple as stated and definitely not 45*. Works very well on my 10 and this is now a vans option for the 12.
I put mine in the outer most bay of the wing so that I could access the backside on an assembled wing. Use 1/8" tubing and insert it into the 1/4" tubing and seal.
N64LR - RV-6A / IO-320, Flying as of 8/2015
N11LR - RV-10, Flying as of 12/2019
Last edited by lr172 : 11-18-2021 at 07:47 AM.