View Single Post
  #6  
Old 11-17-2021, 05:26 PM
Scott Hersha Scott Hersha is offline
 
Join Date: Jan 2005
Location: Cincinnati, OH
Posts: 2,286
Default

Quote:
Originally Posted by dougmattson View Post
Has anybody tried putting a rivet like a static port in the wing at a 45 degree angle for the AOA?
This was discussed previously here, and it apparently works. Iím going to try it on my RV6 Iím building. My fuel tanks are off, so I can get to the inside of my wingtip and get to the inside of the pop rivet, AKA, a Vans static port. The link above shows an approximate angle for the rivet. Not critical, since you program it in your EFIS.
__________________
SH
RV6/2001 built 2000/sold 2005
RV8 Fastback/2008 built/sold 2015
RV4/bought 2016/sold/2017
RV8/2018 built/Sold(sadly)
RV4/bought 2019/sold2021
RV6/Used kit purchased 2021 building
Cincinnati, OH/KHAO
JAN2022
Reply With Quote