What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Re-route the SS Fuel Line to Spider?

[email protected]

Well Known Member
See picture. Working on my baffle installations.
You can see that if I install the CB-707D Aft Center Support Bracket that it interferes with the SS fuel line that runs to the spider.

Can I simply flip that Adel clamp 180 degrees and route the fuel line away from the bracket? This may require small bends in the SS line. Is it that easy to bend. What do you recommend?

Thanks!
Ryan
 

Attachments

  • CB-707D.jpg
    CB-707D.jpg
    394.9 KB · Views: 304
Flip the clamp and bend the line, it is very easy to bend especially when it’s new.
 
Another solution

Here’s what I did. Didn’t want to take a chance on kinking the fuel line. Always different solutions to the same problem.
John Van Lieshout
RV6A QB 85%
Aerosport Power IO-375M1S 195hp
 

Attachments

  • C30DFFDB-0C50-4B82-9ED4-9B75CDEA060C.jpg
    C30DFFDB-0C50-4B82-9ED4-9B75CDEA060C.jpg
    160.3 KB · Views: 212
Here’s what I did. Didn’t want to take a chance on kinking the fuel line. Always different solutions to the same problem.
John Van Lieshout
RV6A QB 85%
Aerosport Power IO-375M1S 195hp
Just make certain that possible vibration will not have the line touch or rub on the bracket.
Another Adel on the line, attached to the bracket maybe???
 
Back
Top