VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Search Forums
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Showing results 1 to 64 of 500
Search took 0.03 seconds.
Search: Posts Made By: Larry DeCamp
Forum: RV-3 Yesterday, 01:59 PM
Replies: 23
Views: 1,155
Posted By Larry DeCamp
Antisplat clamp ?

Ralph~,
`Can you describe the clamp concept in case Antisplat doesn’t chime in. It is my opinion you can optimize bending modulus and section modulus to perfection, but loose it all with minuscule...
Forum: RV-3 06-30-2022, 06:27 PM
Replies: 23
Views: 1,155
Posted By Larry DeCamp
Why not steel ?

Great to hear AL works. I expect a modulus vs. weight comparison with steel could be revealing. How would holes in the flat bar enhance the outcome ? Great work David, thanks. Any energy left to...
Forum: RV-4 06-30-2022, 05:01 AM
Replies: 3
Views: 264
Posted By Larry DeCamp
What is correct oil level to calibrate dipstick ?

I had to shorten the fill tube to clear the James cowl with my Superior -360 engine. I need to reposition the dipstick ( with the tail down of course).

I have concluded that the oil measured in the...
Forum: Electrical Systems 06-24-2022, 10:19 AM
Replies: 18
Views: 1,610
Posted By Larry DeCamp
Draker suggestionm

Any local automotive electric shop has dies and tools for a secure job. They do eveything from bulldozers to fire trucks where where reliability counts.
Forum: VAF Classifieds (posts in here deleted after 30 days) 06-24-2022, 05:43 AM
Replies: 0
Views: 258
Posted By Larry DeCamp
FS 415 wing tips

I have an un-drilled white pair if you need them. We can work out a price that works for you. Shipping can be uncomfortable these days. My objective is to help someone that can use them.
Forum: RV Building Tips/Techniques 06-21-2022, 06:42 PM
Replies: 3
Views: 229
Posted By Larry DeCamp
Heads up on Skybolt fasteners

I love them , BUT:
If you use retainer rings, it is hard to get the cowl on with the studs sticking out trying to scratch everything.
The arc of the oil door probably wont allow the studs in the...
Forum: Primers 06-18-2022, 04:50 PM
Replies: 14
Views: 813
Posted By Larry DeCamp
Other options

nason, Spies Hieker,stewart systems.
Forum: VAF Classifieds (posts in here deleted after 30 days) 06-17-2022, 06:49 PM
Replies: 5
Views: 464
Posted By Larry DeCamp
Two more available in Indiana

decamplarry@gmail.com
Text 765-505-1160
Forum: RV-4 06-16-2022, 04:53 AM
Replies: 12
Views: 842
Posted By Larry DeCamp
RV 4 specific obseration

I had planned to mount a steel plate behind the spar on the two top, inner most 3/8 bolts through the heavy steel doubler supplied buy Van. This may not be rear enough for you as the belt manufacture...
Forum: RV Ongoing Maintenance Issues 06-13-2022, 04:29 AM
Replies: 14
Views: 1,135
Posted By Larry DeCamp
What about this Steve ?

Make an elbow form out of foam sealed with West 105. Wrap it with Dan’s Ultra Black impregnated glass tape as thick as you like. Pour in the Acetone and install ��
Forum: RV Building Tips/Techniques 06-12-2022, 10:33 AM
Replies: 20
Views: 1,352
Posted By Larry DeCamp
Just athought regarding Adel clamps

Make your own for wiring out of .032 aluminum sheared to width. Slip pvc or shrink wrap over it and bend to requirements. About any style tinnerman/nut/thread should hold wires ?
Forum: RV General Discussion/News 06-08-2022, 04:09 AM
Replies: 5
Views: 874
Posted By Larry DeCamp
Angle iron legs

With the engine and mount off, just make two legs that bolt on the fuse with mount bolts at the firewall. Get fancy and put some HF wheels on the end of the legs. X brace them for “suspenders”.
Forum: RV General Discussion/News 06-02-2022, 12:29 PM
Replies: 22
Wax
Views: 2,837
Posted By Larry DeCamp
Dan et.al.

how do you avoid a dry wax ring in the low spots around the flush rivet heads ?
Forum: RV-3 06-01-2022, 07:01 PM
Replies: 17
Views: 1,279
Posted By Larry DeCamp
To Justinuzza

I sent a PM but maybe you didn’t get it.
Thin trailing edges, even if straight cause more stick force.
You will get lots of advice to Bump the trailing edge to increase radius. This will logically...
Forum: Traditional Aircraft Engines 05-28-2022, 05:07 AM
Replies: 33
Views: 3,238
Posted By Larry DeCamp
Regarding auto plug inserts

Some potentially useful observations:

Copper on the the BRONZE threads of the insert and the larger diameter encourage the insert to stay in the engine more often than not.

Graphite on the smaller...
Forum: Traditional Aircraft Engines 05-27-2022, 11:55 AM
Replies: 33
Views: 3,238
Posted By Larry DeCamp
ATS2612 from Spruce

So far no mention of ATS2612 graphite? Copper does get really viscous and feels like your pulling threads removing the plug. This graphite stuff is very thin and plugs do come out easily. Heat...
Forum: Painting your RV 05-18-2022, 04:57 AM
Replies: 12
Views: 1,347
Posted By Larry DeCamp
Smile Adhesion ?

Sometimes west 105 micro can be popped off when cleaning up where you don’t want it. I am at this point in paint prep as discussed above.

You are saying purposful sanding is good enough for the...
Forum: RV Building Tips/Techniques 04-25-2022, 04:18 AM
Replies: 5
Views: 830
Posted By Larry DeCamp
Good wear resistance

I have high wear areas coated by my gunsmith. Examples are instrument panel, throttle quadrant aluminum, floor panels you step on , etc.

Fantastic results and he uses the oven bake process. Did this...
Forum: RV Building Tips/Techniques 04-22-2022, 04:47 PM
Replies: 6
Views: 655
Posted By Larry DeCamp
Polyethylene

Tape or film, your call. Packing tape is terrible to remove when needed. Big box home center has it all.
Forum: Glass Cockpit 04-20-2022, 07:12 PM
Replies: 11
Views: 968
Posted By Larry DeCamp
Touch screen life span ?

No bias here about touch screen convenience. I have had Ifly 720,740 and g3x.
Cell phones, tablets and my Ifly 720 screen die. So does any expert here have a comment on touch life expectancy vs non...
Forum: Tools 04-19-2022, 04:57 AM
Replies: 25
Views: 2,309
Posted By Larry DeCamp
Boeshield type alternative

Grizzley Tools sell a can of jelly from Slip It Industries for this purpose, table saws ,planers etc. smears on easy and dries. Not a silicone, I think its more Boeshild, paraffin based.
Forum: RV General Discussion/News 04-14-2022, 06:54 PM
Replies: 5
Views: 462
Posted By Larry DeCamp
Call Rocket Bob

Call Rocket Bob
Forum: Safety 04-11-2022, 05:26 AM
Replies: 7
Views: 906
Posted By Larry DeCamp
Fuel tank vents

The plans suggest a tube up the firewall and down through the floor.

The “Rocket” vent is two coils at the root rib and out the floor.

There is testimony here that pressure under the wing will feed...
Forum: Tools 04-08-2022, 11:25 AM
Replies: 6
Views: 710
Posted By Larry DeCamp
Some facts of life to ponder

I bought a Cleveland die recently and had a question regarding the fit of my number 8 flat head screws. They had Bob Avery call me because that was where the die came from.

Bob was so helpful and so...
Forum: RV-10 04-08-2022, 06:45 AM
Replies: 24
Views: 5,641
Posted By Larry DeCamp
Vent physics questions ?

Good info above about vent line ends, re: squared off/angled/ and rivet heads. Apparently the pump suction can overcome realistic negative air pressure.

I employed the “rocket style” double ring of...
Forum: RV Building Tips/Techniques 04-05-2022, 06:24 AM
Replies: 14
Views: 1,506
Posted By Larry DeCamp
Another option

Fab your doubler to fit the fuse skin to your liking.

Glue the doubler in place with 3M 2216.

Mark and drill mounting holes from inside or outside.

Enjoy a beer while thinking how easy that was 😊
Forum: RV-4 04-04-2022, 04:43 AM
Replies: 20
Views: 1,826
Posted By Larry DeCamp
Vans fitting

Any pictures of the fitting ? What do they call it on the website ?
Forum: Glass Cockpit 04-01-2022, 01:56 PM
Replies: 16
Views: 1,466
Posted By Larry DeCamp
Krea question re. Input Config Digital ??

I have been through the config info for GDU460 / GEA24. I do not find a place to choose Digital as opposed to the other two sources resistance or capacitance. Any guidance would be appreciated...Larry
Forum: Glass Cockpit 03-31-2022, 12:05 PM
Replies: 16
Views: 1,466
Posted By Larry DeCamp
ZX-14 response

I just went through this with Ceis and G3Expert. The power is 12v from pin 34 & 35. The signal voltage should be 2.5v from the Ceis sender. I Have not resolved what the GEA24 is looking for. Docs say...
Forum: Glass Cockpit 03-30-2022, 04:37 AM
Replies: 1
Views: 342
Posted By Larry DeCamp
G3x wiring to Kavilco sensor ?

Garmin docs show all Kavilco sensors ( OP / FP/ MP etc )wired with shielded. The sensors have plain wire leads. Is Shielded really required? Your experience would be helpful.
Forum: RV Building Tips/Techniques 03-29-2022, 06:53 PM
Replies: 14
Views: 1,340
Posted By Larry DeCamp
Thanks STU

The left tank has what looks like a sender. It had a flop tube but I removed it.
There are no wires visible between tank and spar.
So, If I am willing to risk the sender is sealed well, are there no...
Forum: RV Building Tips/Techniques 03-29-2022, 03:22 PM
Replies: 14
Views: 1,340
Posted By Larry DeCamp
How to remove fuel tank.

I want to double check my second hand (bought the project) tanks for bubbles before painting. My concern is no access to the rear, so they must come off.

I am aware to put thin a sheet under the...
Forum: Glass Cockpit 03-28-2022, 12:30 PM
Replies: 3
Views: 439
Posted By Larry DeCamp
Sheilding requirments ?

Thanks to all. CEIS and Garmin confirm the latest GEA24 docs do not specify 12V is required. FWIW, 2.5V are the correct output from the CEIS sensor. Both acknowledge a Garmin update for EXPERIMENTAL...
Forum: Glass Cockpit 03-25-2022, 12:23 PM
Replies: 3
Views: 439
Posted By Larry DeCamp
Help with GEA24 / Ceis digital level sensors

I have confirmed 5V at sensors. The touch 46xx shows EIS error on the screen.I want to confirm float motion function before prosealing the sensor in the tank,as CEIS suggests. Is there a way to do...
Forum: Traditional Aircraft Engines 03-25-2022, 06:18 AM
Replies: 20
Views: 1,568
Posted By Larry DeCamp
Filter data confusion

I have done surface area calcs including pleat depth . And following guidelines for cfm requirements for an IO360, I built a custom FAB to match.

The FAB didn’t work out well for the SamJames cowl...
Forum: RV-4 03-22-2022, 04:53 AM
Replies: 4
Views: 829
Posted By Larry DeCamp
Shelf

Be sure to leave plenty of room on the sides like flyhub. Access to rudder peddles , brakes etc , else you will be stripping the cockpit and laying on your belly 😒
Forum: Tools 03-21-2022, 05:15 AM
Replies: 2
Views: 442
Posted By Larry DeCamp
Need torq set tip for 10-32 screws

Does any body have a tip they will sell. On line appears to be minimum pack of 5 witj $12 shipping 😨
Forum: RV General Discussion/News 03-07-2022, 06:24 AM
Replies: 2
Views: 929
Posted By Larry DeCamp
Thanks Mel

Key issue in your answer is “it cannot be converted”. My primary objective was avoid expensive ELT and batteries, but the next guy may have a lady that loves to fly. So, cheap ELT it is 😏
Forum: RV General Discussion/News 03-06-2022, 07:04 PM
Replies: 2
Views: 929
Posted By Larry DeCamp
Mel DAR question

I fly alone. My RV3 served my flying needs. Jim Winings convinced me to try an RV4 because he considered it a superior specimen.
So, my RV4 will need an Airworthiness Inspection. I would like to...
Forum: RV-3 02-28-2022, 06:33 PM
Replies: 11
Views: 892
Posted By Larry DeCamp
One more input

I worked with B&C . They were very helpful, but all combinations of adaptors and spacers will not clear the mount. Soo, I machined an adaptor to the acc. Case for remote filter. Jegs filter bracket...
Forum: RV-4 02-17-2022, 05:24 AM
Replies: 414
Views: 393,690
Posted By Larry DeCamp
V6

I had bad transmission clarity from the start and weak headset performance with the in ear Halo QT. Fiddling with all the setting options on the radio made little difference. So, I finally deployed...
Forum: Electrical Systems 02-13-2022, 11:34 AM
Replies: 10
Views: 813
Posted By Larry DeCamp
Battery capacity tester ?

Yes,yes many threads on this. B&C agrees that buss voltage is the important thing to monitor in flight. So, I did not incorporate the Garmin shunt in my E system.

I would like to use it to make a...
Forum: RV General Discussion/News 02-11-2022, 07:27 AM
Replies: 17
Views: 1,740
Posted By Larry DeCamp
5 PSI ?

Why isn't 5 PSI always 5 PSI ? If the float handles 5 PSI from mechanical pump and the Facet shows 5 when on, how is the Facet to blame ?

Not disagreeing with parts substitution to move forward,...
Forum: Traditional Aircraft Engines 02-05-2022, 04:28 AM
Replies: 15
Views: 1,750
Posted By Larry DeCamp
Another option ?

Phillips says their preservative oil is good for 10 hours of normal operation. There is justified concern about flying frequently enough to keep the cam oiled. The time lapse between first start,...
Forum: RV-8/8A 01-28-2022, 05:17 AM
Replies: 15
Views: 1,675
Posted By Larry DeCamp
Will the spars be square with the fuse axis ?

I have no experience with pre-punched assembly. But I do know very small changes at the fuse spar bulkhead can yield significant variance in wing tip forward/ rearward sweep and tip to tail...
Forum: RV Building Tips/Techniques 01-25-2022, 09:18 AM
Replies: 5
Views: 805
Posted By Larry DeCamp
Thanks for the help

Yes, it appears they are a torq-set cruciform screw. The part number on the screw is NAS1581 A3 R. ACS and Gen aircraft parts are potential sources. Apex and Mc Master are the two driver sources I...
Forum: RV Building Tips/Techniques 01-24-2022, 09:15 AM
Replies: 5
Views: 805
Posted By Larry DeCamp
Help with machine screw source needed

My project wings came with tanks mounted. The 10-32 flat head screws have a smaller head diameter .270" than standard.370". They also have a strange drive cross that is not Phillips but not full...
Forum: RV Building Tips/Techniques 01-23-2022, 06:15 AM
Replies: 53
Views: 37,270
Posted By Larry DeCamp
The value of coils ?

I did the 2 coil thing on my -3 and it worked very well. Referring to the nice pic on the the previous post :

Per Dan H calcs, 1/10 gallon is more than the coil can hold.

A little dribble is really...
Forum: RV-4 01-18-2022, 03:08 PM
Replies: 0
Views: 377
Posted By Larry DeCamp
Wing root trim fastener screw spacing ?

The RV4 plans I have call for 6”-8” spacing with R1 note calling for 2 1/2” spacing.
2 1/2’ seems aggressive . What is the common practice on -3 thru -8 ?
Forum: Traditional Aircraft Engines 01-14-2022, 06:20 AM
Replies: 3
Views: 532
Posted By Larry DeCamp
My bad, sorry !

The cam taper and follower crown is to avoid a “divit”in the follower surface.
The tapered rocker tip does the valve rotation.
Forum: Traditional Aircraft Engines 01-14-2022, 05:46 AM
Replies: 3
Views: 532
Posted By Larry DeCamp
Thanks Kieth

So why do they make such a big deal out of flat followers are slightly crowned and the cam lobe is tapered ? Just trying to get educated.
Forum: Traditional Aircraft Engines 01-13-2022, 06:33 AM
Replies: 3
Views: 532
Posted By Larry DeCamp
Roller cam / valve rotation ? I

Roller followers don’t rotate the push rod. Assuming the rocker arm tip is still an angled surface and the valve stem is flat, does a roller cam rotate the valve less than a flat follower ? If so,...
Forum: Traditional Aircraft Engines 01-10-2022, 05:45 AM
Replies: 17
Views: 6,195
Posted By Larry DeCamp
Why not an external o-ring ?

Could you use a thin jamb nut to compress a silicone oring where the threaded shaft comes out the casting ? It obviously depends on the distance available to the keyed nut above. BTW, what is the...
Forum: RV-4 01-07-2022, 02:19 PM
Replies: 5
Views: 720
Posted By Larry DeCamp
Re: spar installation

I recently observed a potential gotcha that worked out OK. My wings were built very well by a young engineer that now builds surgical instruments for brain surgery. The fuse was fixtured ready for...
Forum: RV Building Tips/Techniques 01-06-2022, 06:44 PM
Replies: 2
Views: 469
Posted By Larry DeCamp
Carry through bolt drill bushings

If you need to drill the .312 bolt holes in your rear spar/carry through, I machined 4 drill bushings to assure the hole stays located and squire from 1/16” drill through .312 reamer. The bushings...
Forum: Fiberglass 01-05-2022, 04:58 AM
Replies: 13
Views: 2,198
Posted By Larry DeCamp
More options

I have dipped my glove in acetone for a lubricant and sculpted the goo to a nice finish for sanding. Another option is leave the micro wetter and apply a very thin poly film (like dry cleaning bag )...
Forum: Safety 01-02-2022, 04:09 PM
Replies: 19
Views: 2,137
Posted By Larry DeCamp
Good input, but I will stir the pot a little.

So, for safety, van specifies large washers where they can be applied to keep the outer race from coming off the inner ball.
Yet, the kit is supplied with components that do not support the washer...
Forum: Safety 01-02-2022, 10:19 AM
Replies: 19
Views: 2,137
Posted By Larry DeCamp
Heim joint without big washer (1996 RV4 )?

My RV4 kit ( circa 1996 ) came with Heim joint studs that secure the flap actuator rod in 1/8" doublers on the last rib. There is no way to add a big washer to prevent the race from coming off the...
Forum: RV-3 12-31-2021, 02:55 PM
Replies: 22
Views: 3,546
Posted By Larry DeCamp
-3 ground handling

FWIW, I am just a PP with over 1100 hours TW. Champ, Luscombe, Rose Parrakeet (very light with tail skid ), RV 3B w/ 250 hr. The 3 even had the Flyboy accessories geometry tail wheel. I always found...
Forum: RV Ongoing Maintenance Issues 12-28-2021, 05:13 AM
Replies: 10
Views: 1,609
Posted By Larry DeCamp
Abuura question ?

I have wondered how folks balance for cruise when static is only 2150 on my FP prop. Will a CS turn 2400 static ?

I have imagined mounting the sensor and taking readings in flight . That would...
Forum: RV-4 12-21-2021, 02:05 PM
Replies: 3
Views: 574
Posted By Larry DeCamp
Thanks for the help !

I will build on 👍
Forum: RV-4 12-21-2021, 12:59 PM
Replies: 3
Views: 574
Posted By Larry DeCamp
Need help with RV4 flap push rod

The path of the push rod appears it will slot the vertical side skin as well as the floor skin. this will notch that fuse surface corner. I am concerned about compromising the load carrying of this...
Forum: RV-4 12-19-2021, 05:12 AM
Replies: 18
Views: 2,658
Posted By Larry DeCamp
HP Aircraft wing tip

FWIW, my home made tips from Steve Smith’s generous guidance save weight. Steve coached me after I asked him about flat tip merit, before the HP commercial relationship developed.

In addition to the...
Forum: Fiberglass 12-18-2021, 07:02 AM
Replies: 6
Views: 1,233
Posted By Larry DeCamp
Something to think about

Consider styrofoam bean bag balls from hobby lobby. Stir in some West 105 like you are making carmel corn. Feed it down into the crevice with a ruler, aluminum strip etc. this should be much lighter...
Showing results 1 to 64 of 500

 
Forum Jump

All times are GMT -6. The time now is 12:12 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.