Dynon Yaw servo install - RV10
I need some advice please. Below is a list that I have compiled of what I think is needed. Can those who has done this installation please comment and tell me if I am on the right track here. Note - already flying RV10. Many thanks.
PARTS NEEDED FOR YAW DAMPER ON AN RV10
LINE ITEM PART NO SUPPLIER QTY PRICE
1 SERVO SV42 DYNON 1 750
2 TILLER ARM/BOW KIT TILLER ARM/BOW KIT DYNON 1 150
3 TILLER ARM/BOW KIT GSA28RV14-YAW STEIN 1 99
4 SERVO CABLE KIT SV-NET-SERVO DYNON 1 65
5 YAW SERVO BRIDAL CABLE CS-00021 VANS 2 70
6 YAW SERVO PLATE F-14189A VANS 1 9.6
7 INSTALL KIT 14 G3X YAW SERVO KIT VANS 1 180
8 YD SWITCH PUSH TO MAKE SWITCH LOCAL 1
NOTES USE ITEM 2 OR 3 - NOT BOTH
Tiller arm/bow kit is simple to make yourself from a sketch. Hacksaw blade for the bow.
Many thanks Bill, I appreciate your advice. But is my list otherwise OK?
I think so. It's been awhile since I did this part. And I have Advanced avionics - similar to Dynon, but different.
|All times are GMT -6. The time now is 04:44 PM.|