I'm in the process of attaching the empennage, and wanted to verify everything before final riveting. ( No wings attached )
In my shop, with everything powered up, good voltages...
I cannot get the trim buttons on the sticks to work.
From the Garmin side ( configuration menu ) all is good. I can do full up trim and full down trim via the Garmin menus. ( Strange thing also, the full up and full-down trim voltages seem reversed. I can fix that, but...)
Everything else seems to work great. This is the only issue I have right now with the electrics.
I've downloaded the latest everything, re-loaded everything ( config files, g3X updates...). I can hear the pitch servo click when changing indicated airspeed to true airspeed.
I've also been studying the wiring diagrams and wondering if it's an AV-60000 problem. I even tried disconnecting the pilot side stick, but not the co-pilot side yet.
*
Ideas?
Thanks in advance
In my shop, with everything powered up, good voltages...
I cannot get the trim buttons on the sticks to work.
From the Garmin side ( configuration menu ) all is good. I can do full up trim and full down trim via the Garmin menus. ( Strange thing also, the full up and full-down trim voltages seem reversed. I can fix that, but...)
Everything else seems to work great. This is the only issue I have right now with the electrics.
I've downloaded the latest everything, re-loaded everything ( config files, g3X updates...). I can hear the pitch servo click when changing indicated airspeed to true airspeed.
I've also been studying the wiring diagrams and wondering if it's an AV-60000 problem. I even tried disconnecting the pilot side stick, but not the co-pilot side yet.
*
Ideas?
Thanks in advance
Attachments
Last edited: