Webb Well Known Member Sponsor Jan 16, 2024 #1 I’m looking for what others have done for a tail wheel tow bolt. I know Flyboy’s has one. What have others used.
I’m looking for what others have done for a tail wheel tow bolt. I know Flyboy’s has one. What have others used.
F FLY6 Well Known Member Patron Jan 16, 2024 #2 I just put in a longer bolt with some spacers I made up that are bigger than the nut and bolt head. This makes it easier for my tow bar to grab
I just put in a longer bolt with some spacers I made up that are bigger than the nut and bolt head. This makes it easier for my tow bar to grab
P PhatRV Well Known Member Patron Jan 16, 2024 #3 Same as above. I use the longer bolt, put extra washers so the ends stick out more.
Low Pass Well Known Member Friend Jan 16, 2024 #4 I installed a longer bolt, removed head and cut threads on one end. One nut and threaded projection on each side to fit inside the tow bar yoke. Last edited: Jan 17, 2024
I installed a longer bolt, removed head and cut threads on one end. One nut and threaded projection on each side to fit inside the tow bar yoke.