mark manda Well Known Member Sep 5, 2005 #1 gotta red yellow and black. need to know positive ground and signal. thanks. lost THAT one sheet.
S sf3543 Well Known Member Sep 5, 2005 #2 Black = Ground Yellow = Signal Red = +5V This is available on the BMA site in the G3 installation manual download. See page 16. Good luck on your installation.
Black = Ground Yellow = Signal Red = +5V This is available on the BMA site in the G3 installation manual download. See page 16. Good luck on your installation.
mark manda Well Known Member Sep 5, 2005 #3 thanks got a few components with yellow positive. I'm not worried about the install-- it's the de-install that'll kill me. newest recommendation I heard is all sensors to be wired off aircraft power-- no longer out of the CPU output supplied pins. I don't think so. www.pbase.com/image/48767776 got it. Last edited: Sep 5, 2005
thanks got a few components with yellow positive. I'm not worried about the install-- it's the de-install that'll kill me. newest recommendation I heard is all sensors to be wired off aircraft power-- no longer out of the CPU output supplied pins. I don't think so. www.pbase.com/image/48767776 got it.
