The T305 bracket as shown in Drawing 12 would put the top two rivets very close to the circular cut outs used to form the rib flange.
Does this edge distance matter as there is a 0.063 T366 Nose Rib to be mount of the other side of the rib?
Options:
a) install as designed and ignore the edge distance issues.
b) Move the location of the bracket down slightly and gain the edge distance.
c) Locate the two upper rivet holes closer to the line of three holes and gain the required edge distance. This puts the two lines of rivet quite close.
d) Any other suggestions.
Last edited: